Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

Search results

  1. Chasemmc

    How to post refit pix

    Working through an interior refit. Replaced galley & passage way stairs Full galley refit Still in progress, passage way refit, laundry. Is their a good way to post the before and after pix without starting a website? thx mark
  2. Chasemmc

    Exhaust pipe clearance

    Getting ready to gut the master head and refit. How much clearance is safe over the exhaust / muffler. Should I use a heat resistant blanket between the two? Will have fully functioning galley maid toilet and pump (recently rebuilt) for someone who can use it. Same as last time, free to u...
  3. Chasemmc

    Radio Recomendations

    Lost main vhf radio. It's old and so rather than repair thought I'd replace. All electronics are old, so no point in matching existing brands as I will probably change all over to Furano later this year. Recomendations, opinions, comments?
  4. Chasemmc

    Anchor Recommenations

    Thinking about replacing original plow style with a Rocna or Mantus. How big - 125lbs for a 56 Hatt my? Can the original galley made windless handle? Existing 300' - 3/8 BBB chain. Planned cruising grounds: Intercoastal Southeast gulf, east coast, and bahamas. Don't like marinas so planning...
  5. Chasemmc

    Source for CC Approved silicone fuel line

    Want to put a cross over between secondary fuel filters 8V92 in order to keep both engines running when fuel filters on one tank are clogging in a situation where both engines required such as transversing an inlet. Just replaced the generators 5/16 supply with Blue silicone. 3' with flare...
  6. Chasemmc

    Racor 2010 2 Micron Filter

    All I can find on Amazon is the 2010SM 2010 Aquabloc II. See attached pix. Went onto Racor's site and the search engine returns nothing. Does it matter? thx mark
  7. Chasemmc

    Northern Lights Generator

    Hello everyone, Attempted to fire up the 20kw NL w/1,200hrs on it. It fired right up and ran for about1 minute and then died. On the restart it would fire and run a second or two and then die. When running was pushing the right amount of water out the exhaust, at least based on my past...
  8. Chasemmc

    a/c contols

    Have to move a 3 dial cruise air control head. It has a thin copper tube from split unit to a "colder/warmer" dial that has no spare length to extend. How would I extend? Can it be replaced with a thermostat? Any ideas on a more elegant solution? Thanks in advance. Mark
  9. Chasemmc

    Galley Overhead Lights

    These are looking for a good new home. Original 1981 glass globes and wired for dc & ac. Free to someone who needs them. U pay shipping, I'll package and ship. Cheers MARK
  10. Chasemmc

    Stinky Black Water Vent lines

    Since the smell permeates the rubber hoses over time, any merit to introducing a nicer smell from the outside into the line with the tank entrance closed. Some sort of disinfectant or powerful cleaner. Over time would that ameliorate the odor or would it take 20 years as well.
  11. Chasemmc

    Aft Salon Enclosure Replacement

    The aft enclosure is shot. Got two quotes, $7k and 9k. Seems like too much. Saw some earlier posts on a wood rigid frame with panel inserts, but can't seem to find those threads. I do all my own wood working, so it would have to be less expensive (if u don't count my time). Looking for...
  12. Chasemmc

    Modern Maid Appliances

    In the process of refitting the galley of an 81 56'MY. I am removing the dishwasher, cook top, and upper oven/vent. All work and in good condition. Free to anyone who can figure out how to get it from the greater Atlanta area to wherever. Also have the trim hardware for the dishwasher still...
  13. Chasemmc

    HVAC Idea, please don't flame me

    My aft stateroom split unit is slowly leaking refrigerant. My local AC guy says use 'stop leak' to get a few more years out of it. But in the course of the discussion I had an idea. (I know, dangerous) Whereas the new 'all in one units' require coolant to circulated at the air handler, is...
  14. Chasemmc

    Restaurant Recommendation Ft. Lauderdale

    I'm going to be in Ft. Lauderdale on Sunday and was seeking a Cuban restaurant for dinner, nothing fancy just want good authentic eatery. Anyone have a recommendation? thx mark
  15. Chasemmc

    Bottom Paint Marina Recomendations

    Getting ready to head down the Tenn-Tom to Mobile Bay and then the Keys and was thinking about hauling somewhere in-between to have the bottom paint renewed (it has ablative now and being in fresh water for the past 5 years is in pretty good shape). The bottom was blister repaired, pealed, epoxy...
  16. Chasemmc

    Need Diesel Sleuth for my Kabota

    My tractor, M4900 ran great. Then while running, started to put out white smoke and stopped. Restart a no go and white smoke smells like diesel. Coolant is green with no contaminants. Oil is good color and no water. Had fluids and filters changed about 10 hrs ago. What could cause? Water...
  17. Chasemmc

    Galley Tear Out

    Nxt week starts the galley refit. For anyone that's interested in the original DW, Oven, sink, and cooktop they are free to anyone willing to come get them. They all work. Can meet u either in Chattanooga or Atlanta.
  18. Chasemmc

    PO Remedition

    Yes the PO painted much of the aframosa panels white. I have been stripping and returning the interior to her former glory. Almost done with the lower passageway walls. He however painted the interior door panel, which are so well made I am hesitant to try and remove the stop strips holding...
  19. Chasemmc

    window tech drawing?

    PO "fixed" salon windows with silicone. Got them apart and cleaned up, but can't figure out how the glides, felt, etc go back in. A cross section would remove all doubt. I got replacement felt from Angie, but not nylon wear strips. Guidance? Thx in advance Mark
  20. Chasemmc

    Head Dome Lights & Cover Plates

    Looked through the past posts and couldn't find an answer. How to remove the chrome dome lights in the heads. Also any direction of LED replacement lamps for these fixtures. Heck, how about replacing the whole rusted and pitted mess. A forty one year service life is really quite remarkable...
Back
Top Bottom